SCI – Model 448

מאפיינים מרכזיים

500VA, 5kV @ 100mA AC Hipot, 6kV @ 10mA DC Hipot, Insulation Resistance, 40A AC Ground Bond, CE Listed

Our 448 model is a 4-in-1 tester with 500VA AC Hipot, DC Hipot, Insulation Resistance and Ground Bond testing capabilities. The 448 is capable of a 500VA AC Hipot output to comply with 100mA leakage current test compliance requirements. This tester features a simple design and easy-to-use interface, reducing setup time and increasing production-line throughput for your application. The 448 is equipped with multiple memories and an optional USB port for remote BUS communication so you can quickly perform tests on a variety of DUTs from the front panel or with a PC. Add to user safety by equipping your tester with Personal Protective Equipment (PPE) via the built-in safety interlock.

לקבלת הצעת מחיר

Hipot עם יכולות בדיקה כדלקמן:

  • AC Hipot
  • DC Hipot
  • Insulation Resistance
  • Ground Bond
MODEL SCI 446 SCI 448
INPUT
Voltage 100 – 120Vac / 200 – 240Vac±10% Auto Range
Frequency 50/60Hz ± 5%
Fuse 10A / 250Vac Slow-Blow 15A / 250Vac Fast-Blow
  Range Resolution Accuracy Range Resolution Accuracy
AC WITHSTAND VOLTAGE
Output Voltage, KVAC 0-5.00 0.01 ± (2% of setting + 5V) 0-5.00 0.01 ± (2% of setting + 5V)
Output Frequency 50Hz/60Hz ± 0.1% , User Selection, 50Hz/60Hz ± 0.1% , User Selection,
Output Waveform Sine Wave, Crest Factor = 1.3 – 1.5 and output voltage > 300V Sine Wave, Crest Factor = 1.3 – 1.5 and output voltage > 300V
Output Regulation, Vrms ± (1% of output + 5V), From no load to full load and Low Line to High Line (combined regulation) ± (1% of output + 5V), From no load to full load and Low Line to High Line (combined regulation)
Hi-Limit AC current, mA 0.10-20.00 0.01 ± (2% of setting + 2 counts) 0.10-99.99 0.01 ± (2% of setting + 6 counts)
Lo-Limit AC current, mA 0.00-20.00 0.01 ± (2% of setting + 2 counts) 0.00-99.99 0.01 ± (2% of setting + 6 counts)
Ramp Time, second 0.2-180.0 0.1 ± (0.1% of setting + 0.05 sec) 0.2-180.0 0.1 ± (0.1% of setting + 0.05 sec)
Dwell Time, second 0, 0.2 – 60.0 (0=continuous) 0.1 ± (0.1% of setting + 0.05 sec) 0, 0.2 – 60.0 (0=continuous) 0.1 ± (0.1% of setting + 0.05 sec)
DC WITHSTAND VOLTAGE
Output Voltage, KVDC 0 -6.00 0.01 ± (2% of setting + 5V) 0 -6.00 0.01 ± (2% of setting + 5V)
DC Output Ripple, Vrms <5 % (6KV / 5mA at Resistive Load) <5 % (6KV / 10mA at Resistive Load)
Hi-Limit DC current, mA 0.02 – 5.00 0.01 ± (2% of setting + 2 counts) 0.02 – 10.00 0.01 ± (2% of setting + 2 counts)
Lo-Limit DC current, mA 0.00 – 5.00 0.01 ± (2% of setting + 2 counts) 0.00 – 10.00 0.01 ± (2% of setting + 2 counts)
Ramp Time, second 0.2 – 180.0 0.1 ± (0.1% of setting + 0.05 sec) 0.2 – 180.0 0.1 ± (0.1% of setting + 0.05 sec)
Dwell Time, second 0, 0.2 – 60.0 (0=continuous) 0.1 ± (0.1% of setting + 0.05 sec) 0, 0.2 – 60.0 (0=continuous) 0.1 ± (0.1% of setting + 0.05 sec)
Discharge Time < 50 msec for no load, < 200 msec for capacitor load < 50 msec for no load, < 100 msec for capacitor load
Maximum Capacitive Load DC Mode 1μF < 1KV 0.08μF < 4KV
0.75μF < 2KV 0.04μF < 5KV
0.5μF < 3KV 0.015uF < 6KV
INSULATION RESISTANCE
Output Voltage, VDC 100 – 1000 1 ± (2% of setting + 5V) 100 – 1000 1 ± (2% of setting + 5V)
Hi-Limit resistance, MΩ 0, 1 – 1000 (0 = OFF) 1 100-499V ± (7% of setting + 2 counts) 0, 1 – 1000 0 = OFF) 1 100-499V ± (7% of setting + 2 counts)
Lo-Limit resistance, MΩ 1 – 1000 1 500-1000V ± (3% of setting + 2 counts) 1 – 1000 1 500-1000V ± (3% of setting + 2 counts)
Ramp Time , second 0.1 or 2.0 0.1 ± (0.1% of setting + 0.05 sec) 0.1 or 2.0 0.1 ± (0.1% of setting + 0.05 sec)
Delay Time, second 0, 0.5 – 999.9 (0=continuous) 0.1 ± (0.1% of setting + 0.05 sec) 0, 0.5 – 999.9 0.1 ± (0.1% of setting + 0.05 sec)
GROUND BOND
Output AC Current, A 1.0 – 40.0 0.1 ± (2 % of setting + 2 counts) 1.0 – 40.0 0.1 ± (2 % of setting + 2 counts)
Output AC Voltage, V 8V(Fixed)
Output Frequency, Hz 50Hz/60Hz ± 0.1%, User Selectable
Maximum Loading 1.0–10.0A/0–600mΩ,10.1–30.0A/0–200mΩ,30.1–40.0A/0–134mΩ
Offset, mΩ 0-100 1 ± (2 % of setting + 2 counts) 0-100 1 ± (2 % of setting + 2 counts)
HI and LO-Limit Resistance, mΩ 0 – 134 (30.1-40.0A) 1 ± (2 % of setting + 2 counts) 0 – 134 (30.1-40.0A) 1 ± (2 % of setting + 2 counts)
0 – 200 (10.1-30.0A) 0 – 200 (10.1-30.0A)
0 – 600 (1.0-10.0A) 0 – 600 (1.0-10.0A)
Fix Ramp Timer, second 0.4 0.1 ± 0.05 sec 0.4 0.1 ± 0.05 sec

0-250mOhm à 0.1sec ramp up

251-300mOhm à 0.2sec ramp up

301-450mOhm à 0.3sec ramp up

>450mOhm = 0.4sec
Dwell Timer, second 0, 0.1 – 240.0 (0 = continuous) 0.1 ± 0.05 sec 0, 0.1 – 240.0 (0 = continuous) 0.1 ± 0.05 sec
GENERAL SPECIFICATIONS
Memories Allows storage of up to 20 different test programs and a single step mode
Remote I/O

Input: Test, Reset, Interlock & Recall Memory 1 – 6

Output: Pass, Fail, Test-in-Process
Interface USB (Optional)
Security Lockout capability to avoid unauthorized access to test set-up programs
Calibration Software and adjustments made through the front panel
Dimension 280mm(W) ×89mm(H) × 400 mm(D) 430mm(W) ×134mm(H) × 400 mm(D)
Weight 18lbs (8kg) 53lbs (24kg)
לקבלת מידע צור קשר השאירו פרטיכם ונחזור אליכם