PacketCheck™ – Software Ethernet Tester

מאפיינים מרכזיים

GL's enhanced PacketCheck™ is a comprehensive PC based Ethernet / IP test tool with BERT and Throughput testing abilities. It is very easy to use as a general purpose network performance analysis tool for 10Mbps, 100Mbps and 1Gbps LANs and WANs.

  • Test Ethernet or IP/UDP traffic of up to 800 Mbps bandwidth
  • Generate full duplex traffic at any of the four layers (Layer1, Data Link with stacked VLAN/ MPLS, Network, Transport) with on-demand bandwidth
  • Generate multi-stream traffic with varying frame size, bandwidth, MAC, MPLS, IP and UDP parameters, payloads, and modes of operation
  • Customizable VLAN stacks up to 3 levels with headers such as VLAN Type, ID, and Priority
  • Customizable stacked MPLS layers up to 3 levels with headers  such as Label, CoS, TTL
  • Customizable protocol headers like MAC Source/Destination address, Length/Type field, IP Source/destination address, and UDP Source/Destination Port
  • Bit-error-rate testing (BERT) on layer 1, layer 2, layer 2.5, layer 3, and layer 4 with various measurements – Bit Error Rate, Sync Loss Count, Bit Error Count, and more
  • PRBS Pattern Generation/Verification of various patterns like QRSS 26-1, 29-1, 211-1, 215-1, 220-1, 223-1
  • User Defined test patterns – up to 24 bytes length
  • Simulate real-world traffic (such as IPTV, RTP,…) by transmitting packets using pre-captured GL proprietary HDL files
  • Generate various run-time impairments – insert/delete bytes, and byte level impairments
  • Jumbo frames are supported, in addition to all normal frame sizes from 64 bytes to 1518 bytes
  • Generate aggregated and per-stream statistics
  • Monitor performance per stream – throughput, Round Trip Delay (RTD), One Way Delay (OWD), total packets, packet loss, out of sequence frames, error frames, correct pattern frames, pattern sync status, bit error rate, sync loss count, error count etc.
  • Generate reports in XML or PDF formats.
  • Generate/receive Ethernet or IP traffic of up to 800 Mbps bandwidth
  • Supports minimum line rate of 6bps
    Generates full-duplex IP, UDP, or Ethernet traffic to Tx and/or Rx traffic on any layer (Layer1, Data Link with stacked VLAN/ MPLS, Network, Transport) with on-demand bandwidth
  • Supports stacked VLAN (up to 3 stacks) and customizable stacked MPLS (up to 3 stacks)
  • Monitors performance statistics – throughput, round trip delay (RTD), one way delay (OWD), total packets, packet loss, out of sequence frames, error frames, correct pattern frames
  • BER Testing – Bit Error Rate, Sync Loss Count, Bit Error Count, PRBS Pattern Generation/Verification of various patterns like QRSS, 26-1, 29-1, 211-1, 215-1, 220-1, and 223-1
  • Run-time impairments generation of various types including Insert/Delete Bytes, and Byte Level Impairments (AND, OR, XOR)
  • Jumbo frames are supported, in addition to all normal frame sizes between Min and Max Frame Length (64 bytes to 1518 bytes)
  • Stream-wise statistics and common statistics for all the streams are displayed
  • Powerful Report Generation feature to generate reports in XML/ PDF formats