KE3150 xDSL Detection Kit

מאפיינים מרכזיים

KE3150 – unique, compact and affordable!

The KE3150 enables technicians to detect both availability and activity of classic and IP-based DSL services.

  • xDSL availability test: ADSL, VDSL2, & more
  • Detection of the Annex variant: DSL / All-IP, DSL / ISDN, DSL / POTS
  • Contactless detection of active DSL signals
  • ETH link test, LAN port finder
  • Visible light source for fibre optic fault location (VFL)
  • Cable finder function
KE420 xDSL Probe
Features Flashlight function
xDSL signal filter LED (ADSL – ADSL 2+, VDSL2 bis 17a / VDSL35b,
Search distance To cable max. 60 cm, search depth under plaster max. 15 cm
Dimensions 220 x 40/35 x 25 mm
Weight 90 g without battery
Additional hardware features Test probe made of non-conductive carbon fibre reinforced plastic
3.5 mm headphone jack
Gold-plated contacts
Detached battery compartment
Power supply 9 V block battery
Casing Sturdy, impact-resistant and weather-resistant ABS-case with membrane keys
KE890/895 xDSL Check
Flexible test cord 25 cm
Test cord connections 2x banana with crocodile clips
1x RJ11 plug with TAE adapter
1x RJ45 plug
Additional test ports 1x 2,5 mm universal optical fibre ferrule (KE895)
Features Continuity test LED + tone
DSL availability test for services according to ITU-T G.441 such as ADSL – ADSL2+, SHDSL, VDSL2, VDSL 35b,
Resistance test by changing the tone frequency
Low battery indication by flashing LED
Auto power off 45 / 90 min. / never (in toner mode)
Device switch-on indicator with LED
Data port test via Link-Blink function
Visible laser light source (VFL) (KE895)
Frequencies Copper (<±1 %) Solid: 1 kHz, 1,9 kHz, 577 Hz
Frequencies Fibre 270, 1000 Hz moduliert + pulse (KE895)
Ranger Copper Max. cable length up to 15 km without load, up to 0.4 mm Ø
Range Fibre Max. cable length up to 10 km (KE895)
Transmitting power (9 V block battery) 9.0 VSS without load / ~ 12 VSS with loaded battery
+5 dBm at 600 Ohm for fundamental 1 kHz
0 dBm at 100 Ohm for fundamental 1 kHz
-5 dBm at 50 Ohm for fundamental 1 kHz
Overvoltage protection Up to 500 V DC / 350 V AC in all modes except CONT and ETH for banana plugs / Pin 4 + 5 on RJ45
Dimensions 150 x 65 x 26 mm
Weight 220 g without battery
Case Solid, shock-resistant and weather-resistant ABS-case
Detached battery compartment
Captive Screw