JT 57××/RMIC

מאפיינים מרכזיים

The new-concept, industrial JTAG-powered PCB tester-programmer the JT 57xx/RMIc ‘CombiSystem’ comprises a sleek base-level 19″ rack-mount chassis assembly that can house up to four customer-specified modules chosen from various JTAG (IEEE 1149.x) controllers, digital IO and analog IO and other measurement modules.

Each of the modules offer similar specifications to their bench-top equivalents but benefit from higher channel and TAP density, smaller footprint and lower overall cost. By mixing and matching the modules users can configure almost any type of JTAG/boundary-scan tester-programmer that might be needed to build the most cost-effective solution.

  • Four module slots for controller, digital IO or MIOS
  • Up to 256 I/O channels and eight TAPs in total
  • High-speed (15MHz) and ultra-high-speed (40MHz) controller options
  • Measurement options for frequency, pulse-width and VDC (analog)
  • Analog source and clock generator
  • Configure your optimum tester/programmer
  • Supports analog and digital I/O channels
  • Front panel output for all test signals
  • User configurable features via embedded FPGA
  • Compact 1U 19″ chassis

JT 5705/RMIc (1/4 width)

  • Two 1149.x compliant Test Access Ports
  • TCK up to 15 MHz
  • Auto Write signal for fast flash programming
  • 64 I/O channels
  • 8 Analog Input and/or Output channels (taken from 64 above)
  • Generated value has an accuracy of +/- 0.45%
  • Measured value has an accuracy of +/- (0.4% + 100mV)
  • Analog range 0 to + 30.0 or ± 15.0V
  • Frequency generator
  • Pulse width counter
  • Frequency measurements to 128 MHz
  • JT 37×7/RMIc-DIO-0 (1/2 width)

  • Four 1149.x compliant Test Access Ports
  • TCK up to 40 MHz continuous
  • 16 static I/Os
  • ETT technology for fast flash programming
  • Configurable flash image buffer
  • JT 37×7/RMIc-DIO-64 (1/2 width)

  • Four 1149.x compliant Test Access Ports
  • TCK up to 40 MHz continuous
  • 64 I/O scan channels
  • 16 static I/Os
  • ETT technology for fast flash programming
  • Configurable flash image buffer
  • JT 5112/RMIc (1/4 width)

    64 I/O channels

    8 Analog Input or Output channels (taken from 64 above)

    Generated value has an accuracy of +/- 0.45%

    Measured value has an accuracy of +/- (0.4% + 100mV)

    Analog range + 30.0V or ± 15.0V

    Frequency measurements to 128 MHz

    Frequency Generator

    Pulse width counter

    JT 5111/RMIc (1/4 width)

  • 64 Digital I/O channels
  • Digital output range (1.0 – 3.6 V)
  • לקבלת מידע צור קשר השאירו פרטיכם ונחזור אליכם