Banner – VE Series Smart Camera

מאפיינים מרכזיים

Vision and Barcode Identification Camera.
Easy to use and offer powerful inspection tools with capabilities to solve a broad range of applications.

  • Banner’s free and easy-to-use Vision Manager Software provides a number of tools and capabilities that enable VE Series Smart Cameras to solve a wide range of vision and identification applications, such as item detection, part positioning, flaw analysis, quality assurance, traceability, etc.
  • Available in 5MP (2592 × 2048 pixels), 2MP (1600 x 1200 pixels), 1.3MP (1280 x 1024 pixels), and WVGA (752 x 480 pixels) models, all with the same powerful inspection and/or identification capabilities
  • Runtime editing capability reduces costly downtime and the software emulator allows for offline building and troubleshooting of applications
  • Factory communications (EtherNet/IP, Modbus/TCP, PROFINET, and Serial RS-232) for integration on the manufacturing floor
  • Six optically isolated I/O and the ability to power and control external lighting
  • Onboard display provides inspection information makes it easy to update sensor settings, facilitating fast product changeover
  • Robust metal housing with optional lens covers to achieve IP67 rating for use in harsh environments


12 V dc to 30 V dc (24 V dc ± 10% if a Banner light source is powered by the sensor)

Current: 400 mA maximum (exclusive of load and lights)

Use only with a suitable Class 2 power supply, or current limiting power supply rated 12 V DC to 30 V DC, 1 A

Supply Protection Circuitry

Protected against reverse polarity and transient overvoltages

Discrete I/O

1 Trigger IN

5 Programmable I/O

Output Configuration

Optically isolated

Output Rating

Output Resistance: < 2 Ω

Strobe Output Resistance: < 13 Ω Programmable Output: 100 mA External Strobe Output: 100 mA

Off-State Leakage Current: < 100 µA

External Light Maximum Current Draw

350 mA

Exposure Time

0.01 ms to 500 ms



VE200G1x: 6.9 mm × 5.5 mm, 8.7 mm diagonal (1/1.8-inch CMOS) VE201G1x: 6.9 mm × 5.5 mm, 8.7 mm diagonal (1/1.8-inch CMOS) VE202Gxx: 7.2 mm × 5.4 mm, 9.0 mm diagonal (1/1.8-inch CMOS) VE205G1x: 12.4 mm × 9.8 mm, 15.9 mm diagonal (1-inch CMOS)



Pixel Size VE200G1x: 5.3 µm

VE201G1x: 5.3 µm

VE202Gxx: 4.5 µm

VE205G1x: 4.8 µm


10/100/1000 4 Mbps Ethernet

Communication Protocols

Ethernet/IP™, Modbus/TCP, PCCC, PROFINET®, TCP/IP, FTP, and RS-232


Device Settings and Inspection Storage Memory: 500 MB

Number of inspection files: 999


256 grayscale levels


Model Frames Per Second Image Size
VE200G1x 60 fps, maximum 752 × 480 px
VE201G1x 60 fps, maximum 1280 × 1024 px
VE202Gxx 50 fps, maximum 1600 × 1200 px
VE205G1x 22 fps, maximum 2592 × 2048 px



Torque—Tapped Holes for Mounting Screws

8 lbf·in (0.9 N·m) maximum torque

Construction Housing: Aluminum

Display Label: Polyester


Ethernet: M12, 8-pin A-code or 4-pin D-code Euro-style female

Light Connector: M8, 3-pin Pico-style female

Power, Discrete I/O: M12, 12-pin Euro-style male

Environmental Rating

IEC IP67 with an optional sealed lens cover properly installed

Operating Conditions

Operating Temperature: 0 °C to +50 °C (+32 °F to +122 °F) 95% maximum relative humidity (non-condensing)

Stable Ambient Lighting: No large, quick changes in light level; no direct or reflected sunlight

Storage Temperature: –30 °C to +70 °C (–22 °F to +158 °F)

Vibration and Mechanical Shock

Meets EN 60947-5-2: IEC 60068-2-27 (Shock: 30G); IEC 60068-2-6

(Vibration: 10 Hz to 60 Hz, 1 mm amplitude)

לקבלת מידע צור קשר השאירו פרטיכם ונחזור אליכם