Apposite – Linktropy Mini

מאפיינים מרכזיים

Linktropy Mini WAN Emulators Provide Ultra Portability and Ease of Use for Assessing True Application Performance At Up To 1 Gbps Speeds

Apposite Technologies’ Linktropy Mini WAN emulation tools provide a portable, low-cost alternative for projects with a smaller scope. With this convenient network testing tool you can quickly simulate basic network conditions for application development and customer demonstrations.

  • Easy to Use: The Linktropy Mini Series WAN emulation tools are a snap to install and configure. Just plug in the Ethernet cables, specify the link conditions, and begin testing. No software to install, no training needed.
  • Bandwidth up to 1 Gbps: Emulate links up to 1 Gbps in each direction with the Mini-G and 100 Mbps with the Mini-G100.
  • Delay up to 10 Seconds: Emulate latency from 0.1 ms. up to 10 sec. in each direction in a constant, normal, or uniform distribution.
  • Error Emulation: Specify loss as a packet loss rate, bit error rate, or both.
  • Emulate Any WAN: Emulate terrestrial, wireless, internet, satellite or any other type of wide area network with robust network testing tools.
  • Traffic Monitor: See a visual display of the current traffic, including throughput graphs and link statistics.
  • Bridging/Routing: Install the device as either a bridge or router.
  • Portable: Carry the Linktropy Mini2 or Mini-G with you. Their small size and light weight make them easy to take wherever you travel.
  • Everything You Need: Everything you need to emulate a WAN is included in these compact devices. No additional hardware or software required.
Emulation Rate
100 Mbps, 350,000 packets per second
       1 Gbps, 350,000 packets per second
Emulation Settings
300 bps — 100Mbps in 1 bps increments
300 bps — 1 Gbps in 1 bps increments
0 ms – 10 sec. in 0.1 ms increments; constant, uniform, normal distributions
Packet Loss Rate
0 – 100% in increments of 0.0001%
Additional Parameters
Bit Error Rate, Queue Depth, Framing Overhead
2x Gigabit Ethernet
1x Gigabit Ethernet, 1x RS-232 serial console
1.1 lbs (0.5 kg)
6.6″ W x 6.2″ D x 1.2″ H (168 mm x 157 mm x 30 mm)
Power Input
12V DC power, 11 Watts